Home

›

Industries Served

› Energy & Utilities

POWER AND UTILITIES

Industrial valves and sealing solutions engineered for your thermal networks.

Industrial valves and sealing solutions engineered for your thermal networks.

Industrial valves and sealing solutions engineered for your thermal networks.

Whether for steam, condensate, hot water, or thermal oil, VAMECA is your trusted partner across Quebec for the selection, replacement, and supply of industrial valves and sealing solutions.

Request an Engineering Assessment

View Steam and Condensate Solutions

Technical Consulting in Quebec · Projects Across Canada

Industrial power generation plant with process piping systems

POWER AND INDUSTRIAL UTILITIES

POWER AND INDUSTRIAL UTILITIES

From supply to return, every component counts.

POWER AND INDUSTRIAL UTILITIES

From supply to return, every component counts.

OPERATING CONDITIONS

The right data before the right valve.

The right data before the right valve.

OPERATING CONDITIONS

The right data before the right valve.

PRESSURE AND FLOW

Reading upstream and downstream conditions

Reading upstream and downstream conditions

Line pressure alone is insufficient. For proper regulation and blowdown, measure the differential pressure across the equipment as well as flow rate fluctuations.

TEMPERATURE AND CYCLING

Describe the Actual Service Scope

Describe the Actual Service Scope

Please specify the normal operating temperature, design extremes, and start-up or shutdown phases. Materials and sealing components are validated to reliably perform within this operating envelope.

INSTALLATION AND OPERATION

Verify Integration

Verify Integration

Diameter, end connections, face-to-face dimensions, and actuator access: a replacement reference must seamlessly integrate into your existing installation.

APPLICATIONS

Four networks. Distinct technical requirements.

Four networks. Distinct technical requirements.

APPLICATIONS

Four networks. Distinct technical requirements.

Process Steam

Process Steam

Supply a heat exchanger, cooking equipment, or a dryer. Differentiate between isolation, pressure reduction, and flow modulation.

Steam and Condensate ↗

Process Steam

Supply a heat exchanger, cooking equipment, or a dryer. Differentiate between isolation, pressure reduction, and flow modulation.

Steam and Condensate ↗

Condensate Drainage and Return

Condensate Drainage and Return

Discharge condensate generated by steam consumers and piping systems. Selection is guided by operating load, back pressure, and lift requirements.

Explore CONA Steam Traps ↗

Condensate Drainage and Return

Discharge condensate generated by steam consumers and piping systems. Selection is guided by operating load, back pressure, and lift requirements.

Explore CONA Steam Traps ↗

Hot Water and Thermal Distribution Networks

Hot Water and Thermal Distribution Networks

Distribute and modulate heating water. Variable flow rate, available pressure drop, and mixing or diverting function must be specified.

Explore Hot Water Systems ↗

Hot Water and Thermal Distribution Networks

Distribute and modulate heating water. Variable flow rate, available pressure drop, and mixing or diverting function must be specified.

Explore Hot Water Systems ↗

Thermal Oil

Thermal Oil

Isolate or regulate thermal fluids. Specify the oil type, operating temperatures, and required sealing performance for the valve body, bonnet joints, and stem.

Explore Thermal Oil Systems ↗

Thermal Oil

Isolate or regulate thermal fluids. Specify the oil type, operating temperatures, and required sealing performance for the valve body, bonnet joints, and stem.

Explore Thermal Oil Systems ↗

STEAM LOOP

Return lines are just as critical as feed lines.

Return lines are just as critical as feed lines.

In a steam loop, selecting the right equipment also depends on upstream and downstream conditions.

STEAM LOOP

Return lines are just as critical as feed lines.

In a steam loop, selecting the right equipment also depends on upstream and downstream conditions.

Available pressure changes everything.

Available pressure changes everything.

Available pressure changes everything.

Supply · Heat Transfer · Return

Supply · Heat Transfer · Return

Steam Distribution

Steam Distribution

Define the inlet and outlet pressures as well as the required flow rates. Pressure reduction and temperature regulation are two distinct functions.

Transfer Heat

Transfer Heat

A fluctuating load alters operating conditions. Proper sizing requires evaluating the minimum, normal, and maximum operating points.

Drain condensate

Drain condensate

Enter the condensate load, outlet pressure, and lift. The available differential pressure determines the discharge capacity.

Functional schematic of a steam system. Layout, protection systems, and sizing must be customized to suit each specific facility.

Explore Steam and Condensate Solutions

VAMECA SOLUTIONS

A clear function. A tailored solution.

A clear function. A tailored solution.

VAMECA SOLUTIONS

A clear function. A tailored solution.

Control and Isolation

Modulating flow, reducing pressure, or isolating media: the specific function dictates the optimal valve technology. Be sure to also specify the control power source and the required fail-safe position upon loss of power.

View Control Valves

View FABA Valves

Control and Isolation

Modulating flow, reducing pressure, or isolating media: the specific function dictates the optimal valve technology. Be sure to also specify the control power source and the required fail-safe position upon loss of power.

View Control Valves

View FABA Valves

Steam Traps and Condensate Return

Compare blowdown and drain technologies based on the application, start-up and operating loads, and available differential pressure.

View CONA Steam Traps

Steam Traps and Condensate Return

Compare blowdown and drain technologies based on the application, start-up and operating loads, and available differential pressure.

View CONA Steam Traps

Gaskets and Sealing Solutions

Graphite, spiral-wound, or other gasket materials: compare the exact grade, media, service limits, and flange specifications. VAMECA also delivers custom-cut flat gaskets tailored to your exact requirements.

Explore Spiral Wound Gaskets

Compare Graphite Gaskets

Gaskets and Sealing Solutions

Graphite, spiral-wound, or other gasket materials: compare the exact grade, media, service limits, and flange specifications. VAMECA also delivers custom-cut flat gaskets tailored to your exact requirements.

Explore Spiral Wound Gaskets

Compare Graphite Gaskets

Overpressure Protection

For relief and safety valve applications, please provide the process fluid, required discharge capacity, set pressure, operating temperature, and backpressure. Proper valve sizing and applicable code requirements are rigorously verified for the specific equipment being protected.

View SAFE and REYCO Valves

Overpressure Protection

For relief and safety valve applications, please provide the process fluid, required discharge capacity, set pressure, operating temperature, and backpressure. Proper valve sizing and applicable code requirements are rigorously verified for the specific equipment being protected.

View SAFE and REYCO Valves

TECHNICAL SUPPORT & GUIDANCE

Replace without recurring issues.

Replace without recurring issues.

An abnormal noise, fluctuating temperature, or recurring leak alone is not enough to pinpoint the correct solution. Provide your part number and operating conditions so our technical team can deliver a fully documented, reliable valve and seal selection.

Submit My Application

Please specify the quantity, required delivery date, and delivery location. Availability and lead times are subject to confirmation based on the part number.

TECHNICAL SUPPORT & GUIDANCE

Replace without recurring issues.

An abnormal noise, fluctuating temperature, or recurring leak alone is not enough to pinpoint the correct solution. Provide your part number and operating conditions so our technical team can deliver a fully documented, reliable valve and seal selection.

Submit My Application

Please specify the quantity, required delivery date, and delivery location. Availability and lead times are subject to confirmation based on the part number.

Fluid and Piping Systems

Fluid type, exact oil specification if applicable, and system piping schematic.

Operating Conditions

Upstream and downstream pressures, normal and maximum operating temperatures.

Load and Control

Minimum, normal, and maximum flow rates, condensate load, as well as available signal and power supply.

Installation and Replacement

Nameplate photo, diameter/size, end connections, face-to-face dimensions, and observed issue.

FREQUENTLY ASKED QUESTIONS

Key Technical Considerations Before Selection.

Key Technical Considerations Before Selection.

Key Technical Considerations Before Selection.

YOUR PROJECT

Your piping system demands precise component selection.

Your piping system demands precise component selection.

Need to replace a valve, size a steam trap, or engineer a custom gasket? Share your project specifications with our local technical team.

YOUR PROJECT

Your piping system demands precise component selection.

Need to replace a valve, size a steam trap, or engineer a custom gasket? Share your project specifications with our local technical team.

Let's discuss your facility.

A part number, a photo, or a schematic: start with the specifications you have on hand.

Contact VAMECA

All Industries