Warren Controls Logo

Warren Controls 436 Pressure Reducing Valve

Warren Controls 436 Pressure Reducing Valve

Warren Controls 436 Pressure Reducing Valve

The Warren Controls 436 is a self-contained, direct-acting pressure reducing valve engineered for marine and naval applications. It reliably stabilizes downstream pressure in seawater, fresh water, and compatible utility air systems. Available in a variety of body materials and connection styles, each valve is engineered to your specific flow rates, operating pressures, and vessel specifications. VAMECA provides dedicated technical support and reliable local expertise across Quebec.

The Warren Controls 436 is a self-contained, direct-acting pressure reducing valve engineered for marine and naval applications. It reliably stabilizes downstream pressure in seawater, fresh water, and compatible utility air systems. Available in a variety of body materials and connection styles, each valve is engineered to your specific flow rates, operating pressures, and vessel specifications. VAMECA provides dedicated technical support and reliable local expertise across Quebec.

Self-Operated Downstream Pressure Regulation

Self-Operated Downstream Pressure Regulation

Warren Controls 436 Bronze Pressure Reducing Valve, Marine Service Pressure Regulator

¼" to 8" depending on model

Class 150 / 250 / 700

Cv up to 200

Design Temperature: 165°F max.

AUTONOMOUS CONTROL FOR THE MARINE INDUSTRY

AUTONOMOUS CONTROL FOR THE MARINE INDUSTRY

How does the Warren Controls 436 pressure reducing valve operate?

In an onboard system, supply pressure can fluctuate based on pump operation and downstream demand. The 436 pressure regulator mechanically adjusts valve trim to accurately reduce and control downstream pressure. Engineered with a dedicated diaphragm and spring assembly, it delivers reliable control without requiring an electric actuator or PLC. Featuring a fail-open design, this unit should not be confused with a dedicated overpressure protection device.

Downstream Pressure Reduction

An outlet pressure setpoint is determined during the selection process. The regulator responds to shifting operating conditions within its specified operating range.

Autonomous Operation

The mechanical diaphragm and spring assembly acts directly on the valve stem. No electric actuator or analogue signal is required for standard operation.

Fail-open configuration

The 436 Series is specified as fail-open by the manufacturer. This failure mode does not replace the requirement for independent system protection.

Simplified Maintenance

A profiled diaphragm and integrated cage-seat assembly provide streamlined access to internal components. Disassembly procedures vary depending on valve diameter and model.

CONFIGURATIONS AND SELECTION CRITERIA

CONFIGURATIONS AND SELECTION CRITERIA

Pressure, Connections, and Materials for the 436

For dependable valve selection, three critical specifications must be established concurrently: required downstream pressure, system piping connections, and materials engineered for marine fluid compatibility.

DOWNSTREAM PRESSURE SETPOINT

436 · Pressure Relief

The 436 reduces supply pressure to maintain a stable downstream setpoint. Selection of the internal mechanism and spring is engineered based on upstream pressures, flow rate, and the required outlet pressure.

Function

Pressure Reduction

Downstream Setpoint

Project-specified setpoint

Operating Mode

Self-Contained

Safety

Fail-open

The adjustment range depends on the spring and model selected; it is determined based on the required downstream pressure.

MARINE PIPING COMPATIBILITY

436 · Marine Connections

The series offers several connection options for onboard piping systems. MIL-F-20042 flanges, MIL-F-1183 SBUE and SWUE fittings, and select ANSI flanges may not all be available in every size.

Nominal Sizes

¼" to 8"

Pressure Classes

150 / 250 / 700

Flanges

MIL-F-20042

Other Fittings

SBUE / SWUE / ANSI

Verify actual jobsite standards, face-to-face dimensions, and bolt drilling patterns against specifications. Please note that pressure classes denote rating series, not set pressures.

MATERIALS AND SHIPBUILDING

436 · Corrosion-Resistant Designs

The 436 Series is available with an ASTM B61 bronze or stainless steel body, paired with stainless steel or copper-nickel internal trim. These engineered configurations are specifically designed for marine environments and compatible fluid applications.

Body

B61 Bronze / Stainless Steel

Trim

Stainless Steel / Copper-Nickel

Services

Water, seawater, air

Maximum Operating Temperature

165°F (74°C)

Available material combinations and connection options depend on the selected configuration.

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS

Pressure, Temperature, and Marine Certification

The range limits serve as pre-selection benchmarks. The allowable inlet pressure, downstream pressure, and overall performance depend on the specific part number, body material, and operating conditions.

MATERIALS AND IN-SERVICE PERFORMANCE

Body and Trim

Warren Controls specifies ASTM B61 bronze and stainless steel valve bodies, engineered with stainless steel and copper-nickel trim. Corrosion resistance should be verified against actual fluid properties and salinity levels to ensure optimal service life.

Design Temperature

The maximum rated temperature is 165°F (approximately 74°C). This value should not be assumed as an allowable operating temperature across all pressure ratings and valve configurations.

Flow Rate and Capacity

The manufacturer rates the line with a flow coefficient Cv of up to 200. Valve sizing is determined by actual flow rates, pressure drop, downstream setpoint, and the selected model.

CONTROL AND MARINE SPECIFICATIONS

Downstream Setpoint and Pressure Stability

The 436 pressure regulator maintains a consistent downstream pressure setpoint. The adjustment range is determined by the specific model selected and the system's hydraulic conditions.

Shock, Vibration, and Compliance Standards

The manufacturer indicates that numerous configurations are qualified for MIL-S-901 shock and MIL-STD-167 vibration; reference is made to MIL-V-2042 as well as ASTM F1370 Types I and II. Verify qualification documentation for the required part number.

Installation and Safety

The fail-open function must be accounted for in the system's risk assessment. Valve orientation, clearance for adjustments, and maintenance access must be confirmed against the manufacturer's drawing.

To review the 436 series, please specify media, flow rate, upstream and downstream pressures, operating temperature, end connection, pressure class, MIL requirements, and inspection documentation.

MARINE AND NAVAL APPLICATIONS

MARINE AND NAVAL APPLICATIONS

Where can you deploy a Warren Controls 436 regulator?

The 436 Series is engineered specifically for onboard systems handling fresh water, seawater, or air. Each application requires precise flow control, robust pressure ratings, and rigorous qualification standards.

Shipboard Fire Mains

Pressure relief in designated seawater or fire protection supply water systems, in accordance with naval technical specifications.

Shipboard Fire Mains

Pressure relief in designated seawater or fire protection supply water systems, in accordance with naval technical specifications.

Seawater Cooling

Pressure regulation engineered to protect and supply onboard heat exchangers and cooling systems.

Seawater Cooling

Pressure regulation engineered to protect and supply onboard heat exchangers and cooling systems.

Desalination

Reducing feed pressure to compatible treatment and desalination subsystems.

Desalination

Reducing feed pressure to compatible treatment and desalination subsystems.

Flushing and Washing

Pressure reduction in edge-trim rinse and washdown systems, engineered to accommodate simultaneous flow rates and head loss.

Flushing and Washing

Pressure reduction in edge-trim rinse and washdown systems, engineered to accommodate simultaneous flow rates and head loss.

Sonar Dome Filling

Controlled-pressure applications for select sonar dome fill circuits, tailored to manufacturer and vessel specifications.

Sonar Dome Filling

Controlled-pressure applications for select sonar dome fill circuits, tailored to manufacturer and vessel specifications.

Decontamination Stations

Regulated supply for on-board decontamination stations and other compatible auxiliary equipment.

Decontamination Stations

Regulated supply for on-board decontamination stations and other compatible auxiliary equipment.

SERVICE LIFE AND MAINTENANCE

Diaphragm, spring, and seat cage for the 436

The 436 utilizes a mechanical control architecture. The manufacturer specifies a contoured diaphragm designed to eliminate stem travel interference, alongside an integrated cage-seat configuration engineered to streamline maintenance. Specific product variants and replacement parts must be verified against the exact part number.

CONTROL

Downstream Pressure Setpoint

The mechanism regulates the flow passage according to the balance of forces between the diaphragm and the spring, within the manufacturer's specified range.

SAFETY

Fail-open operation

This series is designated as fail-open, making it essential to verify the protection of all downstream equipment.

MAINTENANCE

Accessible Internal Components

The cage-seat design streamlines disassembly. For most sizes, the manufacturer specifies that trim removal requires no specialized tooling.

What information is required for a 436 series request?

For new builds or vessel retrofits, piping specifications and documentation qualification are just as critical as hydraulic operating conditions.

PRESSURE

Upstream and Downstream Setpoint

Please specify the minimum, normal, and maximum inlet pressures, as well as the required downstream pressure.

HYDRAULICS

Flow Rate and Temperature

Minimum and maximum flow rates, media type, salinity, operating temperature, and potential pressure drops.

END CONNECTIONS

MIL-Spec Flanges or Fittings

Diameter, pressure class, connection standard, face-to-face dimensions, and existing drawings.

QUALIFICATION

Marine Requirements and Documentation

Specify shock and vibration requirements, required certifications, testing protocols, and any project-specific approvals.

THE ADVANTAGES OF VAMECA

Configure Your Warren Controls 436 Selection

Configure Your Warren Controls 436 Selection

Configure Your Warren Controls 436 Selection

VAMECA reviews your process, piping, and documentation requirements to consult with Warren Controls and prepare a quote. Availability, lead times, compliance, and pricing are confirmed on the final part number.

Pressure and Flow Analysis

Determine the downstream pressure and verify that flow rate and Cv ratings align with available upstream pressures.

Pressure and Flow Analysis

Determine the downstream pressure and verify that flow rate and Cv ratings align with available upstream pressures.

Marine Connections

Verify diameter, pressure class, flanges, and MIL-spec fittings against existing field installations or project specifications.

Marine Connections

Verify diameter, pressure class, flanges, and MIL-spec fittings against existing field installations or project specifications.

Application-Specific Materials

Evaluate bronze or stainless steel bodies, trim configurations, and corrosion-resistant options based on media type and environmental exposure.

Application-Specific Materials

Evaluate bronze or stainless steel bodies, trim configurations, and corrosion-resistant options based on media type and environmental exposure.

Qualification Requirements

Verify the scope of shock/vibration testing and the documentation available for the target configuration.

Qualification Requirements

Verify the scope of shock/vibration testing and the documentation available for the target configuration.

Controlled Replacement

Identify dimensions, flow direction, spring range, and maintenance clearance constraints.

Controlled Replacement

Identify dimensions, flow direction, spring range, and maintenance clearance constraints.

Verified Quote

Pricing, lead times, availability, and applicable documentation are confirmed upon manufacturer consultation.

Verified Quote

Pricing, lead times, availability, and applicable documentation are confirmed upon manufacturer consultation.

FAQ

Frequently Asked Questions About the Warren Controls Series 436

Frequently Asked Questions About the Warren Controls Series 436

Downstream pressure, seawater service, pressure classes, military connections, qualification, maintenance and replacement.

YOUR MARINE PROJECT

YOUR MARINE PROJECT

Warren Controls 436: Sizing, Selection, and Quote Requests in Quebec

VAMECA partners with shipyards, system integrators, maintenance managers, and procurement teams to identify a 436 valve engineered to match vessel specifications and operating pressure conditions.

Technical Selection

Downstream pressure, flow rate, materials, and connections verified for your specific application.

Qualification Package

Verification of MIL-spec requirements, material test reports, and actual testing capabilities available for this part number.

Request a Custom Configuration Quote

Documentation, pricing, availability, and lead times are verified and confirmed prior to any commercial commitment.

Visual Identity of VAMECA Industrial Products

Need industrial valves or components for your application?

VAMECA supports businesses in Quebec and across Canada with the selection, sizing, and supply of industrial valves, check valves, flanges, and gaskets tailored to their specific operating conditions.

Visual Identity of VAMECA Industrial Products

Need industrial valves or components for your application?

VAMECA supports businesses in Quebec and across Canada with the selection, sizing, and supply of industrial valves, check valves, flanges, and gaskets tailored to their specific operating conditions.

Visual Identity of VAMECA Industrial Products

Need industrial valves or components for your application?

VAMECA supports businesses in Quebec and across Canada with the selection, sizing, and supply of industrial valves, check valves, flanges, and gaskets tailored to their specific operating conditions.