The PS-AMS PSQ integrates the positioner, analogue feedback, automatic commissioning, and diagnostics.
Actuators in stock · Delivery within days on available items.
Up to 3,000 Nm
Integrated Positioner
Analog Feedback
Integrated Diagnostics
Monitor position and track operation
The PS-AMS PSQ combines proven PSQ mechanics with programmable electronics. Automatic commissioning accurately detects end positions and matches setpoint and feedback values to the valve.
Integrated Positioning
Configurable setpoint and feedback in 0/4–20 mA or 0/2–10 V.
Automatic commissioning
Limit switch detection and signal conditioning.
Actionable diagnostics
Logging of starts, motor run time, and operating data.
Accessible Configuration
Configuration via PSCS software and USB cable, or optional local control.
Same Torque, Dual Speed Ranges
The PSQ103/AMS11 and AMS12 highlight the critical importance of sizing operating time in conjunction with torque output.
Adjustable speed
PSQ103/AMS11
An operating time range engineered for more gradual actuation.
Adjustable cut-off torque
65–130 N·m
Actuation Time
36–72 s per 90°
Flange
F05/F07
Protection Solutions
IP67
115 or 230 VAC single-phase, 24 VAC/VDC, or 360–575 VAC three-phase, depending on the model.
Adjustable speed
PSQ103/AMS12
A higher-speed variant engineered within the identical mechanical footprint.
Adjustable cut-off torque
65–130 N·m
Actuation Time
9–18 s for 90°
Flange
F05/F07
Protection
IP67
Data sheet PSQ103/AMS1x specifies S2 30 min and S4 50% at 25°C. Verify the application's actual duty cycle.
A configuration fully aligned with your control and regulation requirements
VAMECA helps you translate your process requirements into a precise configuration. We verify interfaces with both the valve and the PLC, distinguish built-in functions from valuable options, and confirm product availability.
Valves and Actuation
Valve torque
Distinguish between break-away torque and maximum allowable run torque.
Mechanical Interface
Inspect the flange, shaft, bushing, and clearance for manual override.
Operating Time
Specify the required operating speed for your process and the anticipated cycle duty.
Monitoring and Control
Deposit and Returns
Please specify the required analog signal and control action.
Power Supply
Please specify the voltage and phase requirements to ensure selection of the proper control electronics.
Diagnostics and Safety
Configure critical alarms and define fail-safe behavior in the event of power or signal loss.
Provide the nameplate details, valve model, and expected control signals. Our technical team will help you configure the order and options, delivering a tailored proposal and timeline to meet your project requirements.
Specify options right from initial selection
Certain features must be integrated during manufacturing and cannot be retrofitted later.
PSCP Energy Reserve
Supercapacitors allow the actuator to return to a designated fail-safe position. This is an optional feature and cannot be combined with FSP.
FSP Inlet
FSP controls an override position. This input does not serve as an emergency power supply.
Local and Fieldbus Control
PSC.2, Profibus DP, or CANopen are available depending on your configuration. Data sheet PSQ103/AMS1x identifies these as options to be specified upon ordering.
PS Automation Technical Documentation
Complementary Product Lines
Evaluate motion, control, and fail-safe functionality before selecting your actuator.
OTHER PS AUTOMATION PRODUCT LINES
MWP
Motorize a ball or butterfly valve with a PSQ actuator tailored to its torque, control requirements, and operating time specifications.
Discover PSQ →
OTHER PS AUTOMATION PRODUCT LINES
PS-AMS2 PSQ EX
The PSQEX200AMS22 combines an intelligent actuator drive with an explosion-proof enclosure. Selection must be engineered around specific hazardous area classifications and site operational requirements.
Discover the PS-AMS2 PSQ EX →
ORDERING & OPTIONS
PS Automation Accessories
Analog control, position feedback, communication, or fail-safe functions. Explore key features and verify their compatibility with your PS Automation part number.
Explore PS Automation Accessories →