No. You must verify the pressure-temperature rating, materials of construction, process media, connection types, and the specific equipment function.
OIL AND GAS
A proper replacement starts with the media, the function, and the technical specifications. VAMECA supports your valve, actuation, and sealing requirements across treatment, storage, and auxiliary piping systems.
Oil & Gas · Natural Gas · Industrial Utilities
AT YOUR FACILITY
From line tag to final configuration
OPERATING CONDITIONS
SERVICES
Media Type
Media composition, phase, contaminants, and operating conditions drive material selection and engineering design.
MATERIALS
Internal and external sealing
Seat sealing and stem emissions address distinct operational challenges; therefore, specifications and performance criteria must be defined separately.
OPERATIONS
Function and Automation
On-off, modulating, and fail-safe services require precise specification of control signals, status feedback, and fail-safe position upon loss of power.
APPLICATIONS
Transfer and Storage
Line and equipment isolation engineered for your specific pressure, media, end connections, and operating conditions.
Processing and Separation
Valves and sealing solutions for process equipment. Documenting material compositions and deviations between steady-state operation and transient conditions.
Gas & Pressure Regulation
Upstream and downstream pressures, flow rate, temperature, and intended function to specify the optimal valve and actuation package.
Steam and Utility Systems
Heating, cooling, blowdown, and condensate return—each circuit engineered and managed to meet its own distinct operating criteria.
REPLACEMENT FILE
A similar commercial designation does not guarantee assembly compatibility.
Oil & Gas · Natural Gas · Industrial Utilities
Housing and Interfaces
Pressure class, end connections, face-to-face, and overall dimensions
Materials and Sealing Solutions
Bodies, seats, packings, and gaskets
Functionality and Proven Performance
Actuation, Testing, and Required Documentation
Fire-safe, low-emission, corrosive service, or functional safety requirements must be specified in the project file and validated for the exact configuration.
VAMECA SOLUTIONS
Isolation Valves
Ball, butterfly, and other valve technologies engineered for your specific service conditions, interface standards, and project requirements.
Valve Actuation
Electric or pneumatic actuators to be selected based on required torque ratings, operating cycles, and fail-safe position.
Flange Gaskets and Compression Packing
Spiral-wound gaskets, flexible graphite, and gland packing solutions to be verified based on service fluid and assembly specifications.
TECHNICAL SUPPORT & GUIDANCE
Based on the line tag and existing part number, we can provide a detailed comparison of interfaces, materials, and documentation. Please note that a technical deviation must be reviewed and approved prior to order confirmation.
Part Number
Nameplate, Line Tag, and Current Spec Sheet
Services
Media, Pressures, and Temperatures
Function
Control, Cycling, and Fail-Safe Position
Technical File
Testing and Acceptance Criteria
FREQUENTLY ASKED QUESTIONS
YOUR PROJECT
Share the existing data sheet and installation constraints to verify any discrepancies prior to ordering.