Accurate Composition Description

LATTY specifies LATTYgold 92 as a synthetic fibre sheet bonded with an NBR-SBR elastomer blend. This distinction is critical to prevent confusion with pure aramid/NBR or graphite sheets. The published temperature and pressure ratings on the product page represent catalogue parameters, not an authorization to combine maximum values under continuous operating conditions.

Application Limits Specified by LATTY

For high-temperature steam services, the manufacturer recommends evaluating LATTYcarb 96. For highly corrosive media, LATTYgold 5 ACID is the preferred option. These serve as engineering selection guidelines rather than proof of direct incompatibility with LATTYgold 92. Fluid type, chemical concentration, thermal cycling, and actual operating pressure ultimately dictate the suitability of each grade.

Comparing with BLUE-GARD or KLINGERSIL

The competing sheet materials referenced belong to comparable product families, yet their formulations differ in fibres, fillers, and binders. Any substitution analysis must evaluate compressibility, recovery, stress relaxation, required bolt torque loads, and relevant regulatory approvals. Broad cross-referencing by product family must not be construed as an approved equivalence table.

To differentiate specific binders and formulations: LATTYgold 92 G2F and LATTYgold 925. Specifically compare the standard 92 surface treatment against the double-sided graphite coating of the 92 G2F, without presuming direct interchangeability.