Flexitallic SF 2401 is an industrial non-asbestos gasket sheet made of aramid fibres bonded with NBR nitrile rubber, per manufacturer data sheet PDS327 Rev3.
Our Quebec facility manufactures custom-cut flat gaskets to your exact specifications. VAMECA can also evaluate the supply of this part number or engineer a suitable replacement.
AT A GLANCE
Aramid and Blends
Product Family
Compressed Fibre
Material Composition
Compressed NBR-bound aramid fibres (Data sheet PDS327 Rev3)
Maximum temperature and pressure limits cannot be applied simultaneously.
TEMPERATURE
Maximum catalog temperature rating of 350°C, depending on thickness and operating pressure
PRESSURE
Maximum catalog pressure rating of 100 bar, non-concurrent with maximum temperature limits
THICKNESSES
0.5 to 5 mm (specific data sheet SF 2401)
Applications and Key Features
SF 2401 is a general-service compressed fibre gasket material engineered for water, steam, gas, oils, and mild chemicals within published operating parameters.
Published Testing and Approvals
Standards, Testing, and Certification References
Manufacturer test methods, batch certificates to be confirmed.
PART NUMBER ANALYSIS
01 · What Sets This Material Apart
The Flexitallic SF 2401 PDS327 Rev3 datasheet describes an aramid/NBR compressed sheet material. For a 1.5 mm thickness, the manufacturer rates compressibility at 8%, ASTM recovery at 48%, and density at 2.0 g/cm³. It indicates availability in thicknesses from 0.5 to 5 mm and sheet sizes of 1,500 × 1,500 mm. An older product family brochure lists different values; therefore, it is essential to request the applicable datasheet revision.
02 · Operating Conditions to Consider
SF 2401 is a general-service compressed fibre gasket material engineered for water, steam, gases, oils, and mild chemicals within published operating limits. The maximum temperature of 350°C and maximum pressure of 100 bar represent separate operating limits and must not be interpreted as a combined service point.
03 · Prior to Replacement
Do not assume direct interchangeability with SF 2400 or other aramid/NBR sheets. Steam parameters, media compatibility, and bolt-torque requirements depend on the specific datasheet revision. Carefully inspect the flanges, cut gasket, thickness, seating face condition, and project engineering specifications.
Cross-reference materials to review: Flexitallic SF 2400, TEADIT NA1001, and Durlon 7950. These comparisons do not validate direct drop-in substitution.
KEY COMPARISON CRITERIA
Do not assume interchangeability with SF 2400 or other aramid/NBR compressed sheets. Steam parameters, fluid compatibility, and bolt torque specifications remain specific to the selected product version.
Need this gasket, custom cutting, or a replacement?
Part Number: Flexitallic SF 2401
Please provide the part number, thickness, dimensions, quantity, and process fluid. We will review material availability for the specified grade, custom cutting at our Quebec facility, or an engineered alternative tailored to your assembly.
The manufacturer's latest datasheets, certifications, and P/T curves must be reviewed prior to ordering or substitution.
Do not infer interchangeability with SF 2400 or other aramid/NBR sheet materials. Steam operating parameters, fluid compatibility, and bolt torque requirements remain specific to the selected product version.
REFERENCE SHEET
Flexitallic
Compressed aramid fibres with NBR nitrile binder
REFERENCE SHEET
TEADIT
Aramid and synthetic fibres with NBR nitrile binder