INDUSTRIAL GASKETS & SEALING SOLUTIONS

INDUSTRIAL GASKETS & SEALING SOLUTIONS

Flexitallic

Flexitallic

Flexitallic

Flexitallic SF 2400

Flexitallic SF 2400

Flexitallic SF 2400

Flexitallic SF 2400 is a non-asbestos industrial gasket sheet engineered with compressed aramid fibres bonded with NBR nitrile. It is part of Flexitallic's high-performance compressed fibre sheet product line.

Request a Quote

Open Comparison Tool

Manufacturer Documentation

Our Quebec facility manufactures custom-cut flat gaskets to your exact specifications. VAMECA can also evaluate the supply of this part number or engineer a suitable replacement.

AT A GLANCE

Aramid and Blends

Product Family

Compressed Fibre

Material Composition

Compressed aramid fibres with NBR nitrile binder

TECHNICAL SPECIFICATIONS

TECHNICAL SPECIFICATIONS

Material Specifications

Material Specifications

Maximum temperature and pressure limits cannot be applied simultaneously.

TEMPERATURE

Maximum catalog temperature rating of 350°C, depending on thickness and operating pressure

PRESSURE

Maximum catalog pressure rating of 100 bar, non-concurrent with maximum temperature limits

THICKNESSES

0.5 to 3 mm (per specific data sheet)

Applications and Key Features

SF 2400 is a compressed non-asbestos sheet with a nitrile binder designed for standard industrial assemblies. It delivers reliable, general-service sealing performance through its proven aramid/NBR formulation.

Published Testing and Approvals

Standards, Testing, and Certification References

BS 7531 Grade Y and WRAS compliance stated on PDS116 Rev3. Current certificate to be verified.

PART NUMBER ANALYSIS

To properly select or replace this material

To properly select or replace this material

To properly select or replace this material

Sheet Composition and Properties

Data sheet PDS116 Rev3 confirms an aramid/NBR composition, thicknesses ranging from 0.5 to 3 mm, and sheet sizes of 1,500 × 1,500 or 2,000 × 1,500 mm. At 0.75 mm, the published compressibility is 6.8% with a density of 1.79 g/cm³. At 1.5 mm, these values shift to 7.7% and 1.84 g/cm³. ASTM recovery remains above 50%. According to Flexitallic, SF 2400 complies with BS 7531 Grade Y.

Documented Industrial Applications

SF 2400 is a compressed non-asbestos sheet with a nitrile binder designed for standard industrial flanged connections. Its advantage lies in general-service sealing backed by an aramid/NBR formulation. The maximum temperature of 350°C and maximum pressure of 100 bar represent distinct limits and do not constitute a combined operating point.

Selecting a Replacement and Precautions

Specify the process fluid, any hydrocarbon fraction, continuous operating temperature, flange class, and operating pressure. Do not assume 2400 and 2401 are interchangeable based on their nomenclature. Carefully evaluate flanges, cut gasket geometry, thickness, seating surface finish, and project-specific documentation requirements.

Cross-references to evaluate: TEADIT NA1001 and Garlock BLUE-GARD 3000. Technical equivalency must be verified.

Sheet Composition and Properties

Data sheet PDS116 Rev3 confirms an aramid/NBR composition, thicknesses ranging from 0.5 to 3 mm, and sheet sizes of 1,500 × 1,500 or 2,000 × 1,500 mm. At 0.75 mm, the published compressibility is 6.8% with a density of 1.79 g/cm³. At 1.5 mm, these values shift to 7.7% and 1.84 g/cm³. ASTM recovery remains above 50%. According to Flexitallic, SF 2400 complies with BS 7531 Grade Y.

Documented Industrial Applications

SF 2400 is a compressed non-asbestos sheet with a nitrile binder designed for standard industrial flanged connections. Its advantage lies in general-service sealing backed by an aramid/NBR formulation. The maximum temperature of 350°C and maximum pressure of 100 bar represent distinct limits and do not constitute a combined operating point.

Selecting a Replacement and Precautions

Specify the process fluid, any hydrocarbon fraction, continuous operating temperature, flange class, and operating pressure. Do not assume 2400 and 2401 are interchangeable based on their nomenclature. Carefully evaluate flanges, cut gasket geometry, thickness, seating surface finish, and project-specific documentation requirements.

Cross-references to evaluate: TEADIT NA1001 and Garlock BLUE-GARD 3000. Technical equivalency must be verified.

REPLACEMENT TO BE EVALUATED

REPLACEMENT TO BE EVALUATED

Compare designs and alternatives

Compare designs and alternatives

KEY COMPARISON CRITERIA

Please specify the media, any hydrocarbon fraction, continuous operating temperature, flange class, and pressure rating. Note that 2400 and 2401 should not be considered identical based on their designations.

Need this gasket, custom cutting, or a replacement?

Part Number: Flexitallic SF 2400

Please provide the part number, thickness, dimensions, quantity, and process fluid. We will review material availability for the specified grade, custom cutting at our Quebec facility, or an engineered alternative tailored to your assembly.

Request a Quote

Evaluate a replacement

View official documentation

View official documentation

The manufacturer's latest datasheets, certifications, and P/T curves must be reviewed prior to ordering or substitution.

View manufacturer documentation ↗

RELATED PART NUMBERS

RELATED PART NUMBERS

Compare Related Designs

Compare Related Designs

Please specify the media, any potential hydrocarbon fraction, the continuous operating temperature, the flange class, and the design pressure. Note that styles 2400 and 2401 are not identical despite the similarity in their designations. Related reference constructions include: TEADIT NA1001 (Aramid & blends), BLUE-GARD 3000 (Aramid/NBR), and KLINGERSIL C-4400 (Aramid/NBR).

REFERENCE SHEET

TEADIT

TEADIT NA1001

Aramid and synthetic fibres with NBR nitrile binder

View Specifications →

REFERENCE SHEET

KLINGER

KLINGER KLINGERSIL C-4400

Aramid/NBR

View Specifications →

Back to Gasket Comparison Tool

View all 148 part numbers by manufacturer →

VAMECA · Industrial Valves and Sealing Solutions · Quebec / Canada

Contact VAMECA →