This is an overflow drain trap designed for deaerators and steam-blanketed vessels. It reliably discharges condensate and excess liquid through a mechanically piloted valve.
1 to 6 in · NPT or Flanged
Cast iron body (1–4 in.) or steel body (6 in.)
50 psig max. operating pressure
Max. ΔP 15 psi · Max. 250°F
What is the purpose of the Warren Controls 313 overflow trap?
In a deaerator or vessel maintained under a steam blanket, condensation generates excess water that can cause levels to exceed allowable limits. The 313 utilizes the buoyancy of a 316 stainless steel float ball to actuate an internal pilot, opening a single-seated main valve to discharge condensate to drain. It is not intended to replace a safety relief valve, a conventional steam trap, or standard feedwater level controls.
Mechanical Float
As the fluid level rises, it lifts a 316 stainless steel float ball, providing the actuation force for the internal pilot without requiring electrical power or instrument air.
Pilot and Main Valve
The pilot controls the opening of a single-seated main valve to discharge excess condensate as the level demands.
Steam Conservation
The purpose is to relieve overflow while minimizing blanket gas loss. The data sheet specifies a rated leakage rate of 0.1% of rated capacity.
Maintenance Access
The large end cover provides straightforward access to the internal assembly, float, and seals in accordance with manufacturer maintenance procedures.
Select the 313 based on size and connection type
The core function remains identical, but valve bodies and end connections transition from NPT threaded to flanged configurations. Steam trap discharge capacity is determined by the nominal pipe size and available differential pressure.
THREADED CONNECTION
313 · 1 to 2 in NPT
Available in 1", 1½", and 2" sizes with cast iron bodies and NPT threaded connections. An engineered solution for lower excess flow rates and compatible degassing systems.
Diameters
1 · 1½ · 2 in
Sign In
NPT Threading
Chamber
Cast Iron
Float
316 Stainless Steel
Verify the required discharge flow rate and available differential pressure against manufacturer capacities—never size based solely on line diameter.
FLANGED CONNECTION
313 · 3 and 4 in.
Cast iron chambers and Class 125 flat-faced flanges. These dimensions deliver superior overflow capacities while maintaining autonomous, float-operated performance.
Diameters
3 and 4 in.
Sign In
Class 125 Flat Face (FF) Flanges
Internal Components
Brass / Bronze
Float
316 Stainless Steel
Verify the existing flange drilling and facing. Any replacement requires precise body dimensions and sufficient clearance to remove the bonnet.
HIGH CAPACITY
313 · 6 in
The 6-inch model features a steel chamber and Class 150 raised-face flanges, engineered with bronze internal trim and a 316 stainless steel float.
Diameter
6 in · DN150
Sign In
Class 150 RF Flanges
Chamber
Steel
Capacity
Up to 500,800 lb/h*
*Capacity derived from the Warren Controls table for the 6-inch model, at 15 psi ΔP, with flashing condensate. Flow rate varies with differential pressure.
Warren Controls 313: Materials, Pressure Ratings, and Operating Limits
The 313 is engineered for overflow applications on steam-blanketed tanks rather than standard steam line drainage. Operating pressure, downstream backpressure, and required discharge capacity must all be factored into proper sizing.
MATERIALS AND CONSTRUCTION
Cast iron or steel depending on size
Cast iron on 1" to 4" versions; fabricated steel chamber on 6". Internal components are engineered from brass/bronze with a 316 stainless steel float ball.
Pilot-Operated Internal Valve
The float-actuated pilot operates a single-seated main valve. This self-contained, mechanical design requires no electric or pneumatic positioner.
Easy-Access Maintenance
A large end cover provides full access to the internal mechanism. The float and seals require proper inspection during servicing.
OPERATING RANGES
System Pressure
Up to 50 psig operating pressure in accordance with the Warren Controls technical data sheet.
Differential Pressure
The manufacturer specifies capacities in lb/h of flashing condensate across differential pressures ranging from 1 to 15 psi. These ratings provide a reliable benchmark for evaluating and comparing all six sizes.
Temperature and Sealing Performance
Published maximum temperature rating of 250°F (approximately 121°C) with a nominal leakage rate of 0.1% of rated capacity.
To request a consultation, please provide the diameter, vessel pressure, downstream backpressure, overflow flow rate, connection type, and current drawing.
Where should you use a Warren Controls 313 steam trap?
The 313 primarily handles liquid relief in steam-blanketed equipment; a piping system analysis remains essential to verify operating conditions.
FLOAT-OPERATED PILOT SYSTEM
Self-contained operation, without a motor
The 316 stainless steel float detects rising liquid levels. Its movement actuates a mechanical pilot that controls the single-seat valve. No electric motor, 4–20 mA positioner, or compressed air supply is required for this operation.
316 Stainless Steel Float
As the fluid level rises, the float's buoyancy transfers the opening force to the pilot mechanism.
Internal mechanical pilot
The pilot operates the main valve to discharge excess condensate. Operation is directly governed by liquid level, requiring no external control signal.
Vertical orientation
The manufacturer requires the steam trap to be installed in an upright position to ensure proper float operation.
Request a Quote for the Warren Controls 313
Sizing is determined by the volume of condensate to be discharged, the available pressure drop, and the dimensions of the steam trap.
FLOW RATE
Overflow Capacity
Excess liquid flow rate in lb/h or kg/h at actual operating conditions, along with the desired operating margin.
PRESSURE
Vessel and Back Pressure
Steam blanket pressure and blowdown header backpressure to determine the actual ΔP.
END CONNECTION
NPT or Flanged
NPS, Class 125 FF or 150 RF flanges depending on diameter, space constraints, and orientation.
MAINTENANCE
Reference and Accessibility
Nameplate photo, serial number, dimensions, and bonnet clearance required for replacement.
THE ADVANTAGES OF VAMECA
VAMECA reviews your process data and the Warren Controls sizing charts before consulting the manufacturer. Pricing, availability, documentation, and any required CRN are confirmed based on the exact part number.
FAQ
Float, condensate drainage, deaerators, pressure, connections, maintenance, and request a quote.
Warren Controls 313: Technical Support and Quotes in Quebec
Whether for deaerator maintenance, overflow trap replacement, or a new installation, VAMECA helps you verify the part number and operating conditions.
Legacy Equipment Identification
Nameplate data, diameter, dimensions, and end connections serve as the baseline for engineering a reliable replacement solution.
Certified Capacity
Capacity is cross-referenced against the available ΔP, rather than sizing solely based on connection size.
Manufacturer Documentation
The boundaries, engineering drawings, and commercial terms are confirmed for the proposed part number.



