KLINGER KLINGERSIL C-4408 is a wire-reinforced compressed sheet material. This steel mesh reinforcement is the key differentiator from a non-reinforced aramid/NBR formulation. Before replacing C-4408, it is critical to determine whether this reinforcement is required to meet your mechanical strength and assembly specifications.
Our Quebec facility manufactures custom-cut flat gaskets to your exact specifications. VAMECA can also evaluate the supply of this part number or engineer a suitable replacement.
AT A GLANCE
Aramid/NBR with steel wire mesh
Product Family
Compressed Fibre
Material Composition
Aramid/NBR with steel wire mesh
Maximum temperature and pressure limits cannot be applied simultaneously.
TEMPERATURE
Operating range to be verified on the pressure-temperature curve
PRESSURE
Subject to pressure–temperature rating chart and installation requirements
THICKNESSES
0.5 / 1 / 1.5 / 2 / 3 mm
Applications and Key Features
Flat gasket applications where metallic reinforcement is specified. Inspect the flange, gasket dimensions, and torque specifications prior to replacement.
Published Testing and Approvals
Standards, Testing, and Certification References
Standards / Testing: ASTM F36J (2 mm), DIN 52913, DIN 28090-2
PART NUMBER ANALYSIS
01 · Key Material Differentiators
C-4408 combines aramid fibres, an NBR binder, and a wire mesh reinforcement. This specific construction is engineered to meet demanding structural integrity and blowout resistance requirements. A standard non-reinforced sheet of equivalent thickness cannot reliably duplicate these mechanical properties. When evaluating an alternative, verify the reinforcement metal, exact core construction, extrusion resistance, and assembly torque specifications.
02 · Operating Conditions to Consider
While product series designations are similar, KLINGERSIL C-4400 is an unreinforced sheet without this internal mesh. Mechanical strength, compressibility, and surface load limits will differ significantly. The presence of wire reinforcement also alters die-cutting capabilities and tooling wear considerations. Always confirm product commercial status and available thicknesses against current manufacturer documentation.
03 · Pre-Replacement Verification
Document operating pressure, temperature, media, thermal cycling, and flange standard, while also specifying the exact reinforcement type, thickness, bolt pattern, gasket geometry, and bolt load capacity. A technical datasheet indicating a generic aramid/NBR composition is insufficient to qualify a replacement for an engineered, steel-reinforced sheet.
Cross-Reference Materials: KLINGER KLINGERSIL C-4400, KLINGER KLINGERSIL C-4409, and TEADIT NA1000M. These comparative references do not constitute approval for direct substitution.
KEY COMPARISON CRITERIA
Prioritize comparisons with reinforced sheet materials engineered for the same service conditions, rather than standard aramid/NBR sheets. While C-4400 can serve as a formulation benchmark, it should not be considered a direct drop-in replacement when a wire mesh reinforcement is required.
Need this gasket, custom cutting, or a replacement?
Part Number: KLINGER KLINGERSIL C-4408
Please provide the part number, thickness, dimensions, quantity, and process fluid. We will review material availability for the specified grade, custom cutting at our Quebec facility, or an engineered alternative tailored to your assembly.
Compare wire mesh reinforced sheet with unreinforced C-4400 and expanded metal C-4409.
REFERENCE SHEET
KLINGER
Synthetic fibres with NBR and expanded metal reinforcement