Garlock GYLON Style 3530 is a black, graphite-filled PTFE gasketing sheet engineered for severe chemical services. It is specifically recommended by the manufacturer for high concentrations of hydrofluoric acid, monomers, and volatile air pollutants where fugitive emissions must be strictly controlled.
Our Quebec facility manufactures custom-cut flat gaskets to your exact specifications. VAMECA can also evaluate the supply of this part number or engineer a suitable replacement.
AT A GLANCE
Filled / Restructured PTFE
Product Family
PTFE
Material Composition
Graphite-filled PTFE
Maximum temperature and pressure limits cannot be applied simultaneously.
TEMPERATURE
Min. -268 °C · Continuous 260 °C
PRESSURE
55 bar (catalogue maximum, verify according to P/T rating)
THICKNESSES
Thickness specifications not available in source documentation
Applications and Key Features
Garlock specifies an operating range of −268 to 260°C and a maximum pressure rating of 55 bar, subject to pressure-temperature (P x T) factors. This grade is available in sheet form and as cut gaskets. Hazardous fluid compatibility must be evaluated based on the exact formulation.
PART NUMBER ANALYSIS
01 · What Sets This Material Apart
The graphite filler is critical: it distinguishes GYLON 3530 from GYLON grades filled with silica or barium sulphate. Garlock highlights low porosity to minimize volatile organic compound emissions. This does not constitute a universal approval for all hazardous media.
02 · Operating Conditions to Consider
Garlock specifies a range of −268 to 260°C and a maximum pressure of 55 bar, subject to pressure-temperature factors. This grade is available in sheet form and as cut gaskets. Hazardous fluid compatibility must be evaluated for the specific chemical formulation.
03 · Key Considerations Before Replacement
For hydrofluoric acid or monomer service lines, specify the concentration, operating temperature, flange class, and bolt torque before selecting a solution. Do not substitute a silica-filled GYLON for 3530 without verifying chemical compatibility.
Comparable references to evaluate: Durlon 9400. These cross-references do not validate a direct substitution.
KEY COMPARISON CRITERIA
Graphite-filled GYLON 3530 differs from silica-filled 3500, for which Garlock excludes hydrofluoric acid applications.
Need this gasket, custom cutting, or a replacement?
Part Number: Garlock GYLON 3530
Please provide the part number, thickness, dimensions, quantity, and process fluid. We will review material availability for the specified grade, custom cutting at our Quebec facility, or an engineered alternative tailored to your assembly.
Comparison of carbon-filled PTFE, particularly critical for evaluating permeability and chemical compatibility. Do not transpose operating limits from one grade to another.