Durlon 9200 is a barium sulphate-filled PTFE gasket sheet engineered for aggressive chemical media and a wide range of process applications.
Our Quebec facility manufactures custom-cut flat gaskets to your exact specifications. VAMECA can also evaluate the supply of this part number or engineer a suitable replacement.
AT A GLANCE
Filled / Restructured PTFE
Product Family
PTFE
Material Composition
Barium sulfate-filled PTFE
Maximum temperature and pressure limits cannot be applied simultaneously.
TEMPERATURE
Min. -268°C · Catalog Max. 260°C
PRESSURE
83 bar (catalogue maximum, subject to P/T rating verification)
THICKNESSES
0.4 / 0.8 / 1.5 / 2.5 / 3.0 mm
Applications and Key Features
Durlon specifically highlights caustic solutions, hydrogen peroxide, sodium hypochlorite, and chemicals encountered in pulp and paper as well as industrial process applications.
Published Testing and Approvals
Standards, Testing, and Certification References
Specified approvals: BAM, FDA, TA-Luft, DVGW, ABS-PDA
PART NUMBER ANALYSIS
01 · Key Material Differentiators
The type of filler used in a PTFE compound directly impacts bolt-load retention, creep resistance, and chemical compatibility. Therefore, specifying "PTFE" alone is insufficient for selecting the proper gasket sheet.
02 · Operating Conditions to Consider
Durlon specifically highlights suitability for caustic solutions, hydrogen peroxide, sodium hypochlorite, and aggressive chemicals commonly encountered in pulp and paper and industrial process operations.
03 · Pre-Replacement Verification
Confirm fluid composition, concentration levels, and specific process parameters. For strong oxidizers, severe thermal cycling, or regulated applications, verify the chemical formulation and review published test data for the exact material grade.
Equivalent references to evaluate: Garlock GYLON 3510, KLINGER top-chem 2006, and TEADIT TEALON TF 1580. Note that cross-referencing does not constitute validation for direct substitution.
KEY COMPARISON CRITERIA
Durlon 9400 is another carbon-filled PTFE formulation, offering an effective solution when certain mineral fillers are unsuitable. The two grades are not directly interchangeable.
Need this gasket, custom cutting, or a replacement?
Part Number: Durlon 9200
Please provide the part number, thickness, dimensions, quantity, and process fluid. We will review material availability for the specified grade, custom cutting at our Quebec facility, or an engineered alternative tailored to your assembly.
Same family of barium sulphate-filled PTFE for chemical media, specifically alkaline services. Formulations remain engineered to application specifications.