LATTYflon 84 L is a modified PTFE sheet designed for static sealing. Its specific formulation, mechanical behaviour under load, and operating limits must be carefully evaluated when selecting an alternative. While virgin or expanded PTFE can offer similar chemical compatibility, each behaves differently under bolt load.
Our Quebec facility manufactures custom-cut flat gaskets to your exact specifications. VAMECA can also evaluate the supply of this part number or engineer a suitable replacement.
AT A GLANCE
Filled / Restructured PTFE
Product Family
PTFE
Material Composition
Filled modified PTFE, exact filler type to be confirmed
Maximum temperature and pressure limits cannot be applied simultaneously.
TEMPERATURE
Min. -200 °C · Max. catalogue 260 °C
PRESSURE
85 bar (catalogue maximum, verify according to P/T rating)
THICKNESSES
Thickness specifications not available in reference documentation
Applications and Key Features
Flange gaskets for chemical or industrial processes with compatible media, subject to verification of the LATTY technical data sheet and specified torque requirements.
Published Testing and Approvals
Standards, Testing, and Certification References
Approvals specified on the LATTY data sheet: FDA and BAM.
PART NUMBER ANALYSIS
01 · What distinguishes this material
PTFE-based products differ by their structure and formulation. Expanded PTFE, restructured PTFE, and modified sheet materials do not necessarily exhibit the same compressibility or creep resistance. For LATTYflon 84 L, consult the manufacturer data sheet alongside the candidate material’s specification sheet to compare measured properties, temperature capabilities, and chemical compatibility.
02 · Operating conditions to consider
Published catalogue ratings are baseline reference points, not an open pass for all pressure and temperature combinations. Low-bolt-load installations or fragile sealing faces require careful evaluation of minimum seating stress and relaxation. Fluid characteristics, concentration levels, and thermal cycling can further restrict material selection.
03 · Prior to replacement
Identify the part reference and thickness, followed by media composition and concentration, operating pressure, temperature, flange class, and flange face metallurgy. Review material composition, manufacturer limitations, and any required industry approvals or certifications. A product from the same material family is an engineering lead, not a guarantee of drop-in interchangeability.
References for evaluation: LATTYflon 94 L, LATTYflon 95, and KLINGER top-chem 2000. These cross-references do not validate direct substitution.
KEY COMPARISON CRITERIA
Modified PTFE formulations from Garlock, Durlon, KLINGER, or TEADIT can be benchmarked against one another, without presuming identical filler content or technical approvals. Field validation must evaluate the flange surface finish, service parameters, and gasket creep relaxation under the specified bolt load.
Need this gasket, custom cutting, or a replacement?
Part Number: LATTYflon 84 L
Please provide the part number, thickness, dimensions, quantity, and process fluid. We will review material availability for the specified grade, custom cutting at our Quebec facility, or an engineered alternative tailored to your assembly.
The manufacturer's latest datasheets, certifications, and P/T curves must be reviewed prior to ordering or substitution.
Compare three PTFE configurations. The 84 L formulation must be confirmed prior to sourcing any replacement.