Flexitallic SF 4300 is a compressed gasket sheet reinforced with organic and glass fibres bound with an elastomeric binder. The DNV Type Approval Certificate TAP000010D details its construction and testing parameters without specifying the binder's exact chemical formulation.
Our Quebec facility manufactures custom-cut flat gaskets to your exact specifications. VAMECA can also evaluate the supply of this part number or engineer a suitable replacement.
AT A GLANCE
Aramid and Blends
Product Family
Compressed Fibre
Material Composition
Organic and glass fibre blend bound with an elastomer
THICKNESSES
0.75 to 6.0 mm, DNV certificate scope
Applications and Key Features
Within the scope covered by DNV, the product is approved for use in marine systems and equipment handling non-flammable gases, water, oil, and fuel. The certificate explicitly excludes steam piping, LNG lines, flammable gases, and specific cargo lines.
Published Testing and Approvals
Standards, Testing, and Certification References
DNV type approval TAP000010D, Rev. 1, valid until 2027-05-29. Steam and select gases/cargoes excluded as per certificate specifications.
PART NUMBER ANALYSIS
01 · Key Material Distinctions
SF 4300 is a compressed gasket sheet composed of organic and glass fibres bonded with an elastomer binder. DNV Type Approval Certificate TAP000010D documents its construction and test standards without detailing the binder’s specific chemical formulation. DNV specifies a compressibility of 9%, recovery of 52%, a density of 1.86 g/cm³, and sheet thicknesses ranging from 0.75 to 6.0 mm.
Issued on May 30, 2022, the certificate is listed as valid until May 29, 2027, subject to compliance with its certified scope of application.
02 · Operating Conditions to Consider
Within the scope covered by DNV, this material is approved for shipboard piping systems and equipment handling water, oil, fuel, and non-flammable gases, among other media. The certificate explicitly excludes steam lines, LNG lines, flammable gases, and select cargo piping systems.
03 · Considerations Prior to Replacement
While DNV type approval is a key benchmark in marine applications, it does not guarantee suitability across all process lines nor the compliance of adjacent sealing components. Verify the specific piping circuit requirements and the vessel's mandated class certifications.
Comparative references to evaluate: KLINGER KLINGERSIL C-4430, TEADIT NA1081, and Durlon 8500. These cross-references do not validate a direct drop-in substitution.
KEY COMPARISON CRITERIA
While DNV type approval is an asset for marine applications, it does not guarantee suitability across all piping systems or ensure the compliance of adjacent components. Always verify the specific service line requirements and the classification certificates mandated for the vessel.
Need this gasket, custom cutting, or a replacement?
Part Number: Flexitallic SF 4300
Please provide the part number, thickness, dimensions, quantity, and process fluid. We will review material availability for the specified grade, custom cutting at our Quebec facility, or an engineered alternative tailored to your assembly.
The manufacturer's latest datasheets, certifications, and P/T curves must be reviewed prior to ordering or substitution.
While DNV type approval is a key asset in marine applications, it guarantees neither universal line suitability nor the compliance of adjacent materials. Always verify the specific piping system type and the vessel's mandatory certification requirements.
REFERENCE SHEET
KLINGER
NBR nitrile-bound synthetic fibres